Model 2150-10/100A

Ethernet RJ45 to Fiber Optic Media Converter

S.I.Tech 2150 Ethernet media converter is a compact adapter for connection of Ethernet based equipment over fiber optic cable at 10 Base-T/100 Base-TX and 10 Base-FL/100 Base-FX. It uses ST or SC for Multimode fiber and ST, SC, or FC for Single mode fiber. Model 2150 auto senses and switches between 10 and 100 Mbps. The unit contains LED indicators to provide visible verification of transmission status and media converter functions.

Note: The 2150-10/100A pair auto negotiates between 10 Base-T and 100 Base-Tx ports and chooses the best mode of operation (half/full duplex, 10/100 Mbps). If one of the connecting ports also supports operation at 1000 Base-T - Gigabit (e.g., 10/100/1000Mbps NIC), the 2150-10/100A pair will auto negotiate to the best mode of operation not exceeding 100 Mbps - however, one of the connecting ports must be limited to 10 or 100 Mbps operation.

Specifications

Operating Distance for Fiber Optic Cable

Optical Unit Connection: Connect the optical transmission line to the T and R receptacles. Note which cable channel goes to T or R by noting cable imprint. On the other end, reverse the connections.