S.I. Tech Home » Fiber Optic LAN/WAN Solutions » Model 2160

Model 2160

Gigabit Ethernet to Fiber Modem

S.I. Tech Model 2160 Gigabit Ethernet to Fiber Modem

S.I. Tech Model 2160

Features:

Supports IEEE 802.3x 10/100/1000Base-T/1Gbps twisted pair link
Meets IEEE 803.3x clock jitter and frequency variation specifications
Automatic speed detection and adjustment 10/100/1000
Full duplex operation
Auto MDI/MDI-X (Automatic detection of straight or crossover twisted pair cables)
Automatic master/slave determination
SC optical connectors standard
Wide range input power: 5 to 60 VDC, 10W
LED Indicators: Optical Power Detect, Optical Receiver Signal Lock, Ethernet Link Established, 10/100/1000 Operation, Activity and Collision
Available with 850nm multimode or 1310nm or 1550nm single mode optics
Multiple optical power configurations to support 5, 10, 20 to 80 Km fiber runs (single mode only)
PoE option

The S.I.Tech 2160 Bit-Driver is intended to extend the length of Ethernet links to up to 80Km for long haul backbone applications. Once installed the 2160's are completely transparent to the system. Units must be installed in pairs. Network timing limitations and fiber attenuation and bandwidth may limit maximum transmission distance to less than maximum.

Note: The PC, Switch, or Hub to which S.I. Tech 2160 is attached must support Auto Negotiation, i.e. Auto 1000, Auto 100 or Auto 10 Mbps.

Optical Unit Connection: Connect the optical transmission line to the T and R receptacles. Note which cable channel goes to T or R by noting cable imprint. On the other end, reverse the connections.

Specifications

Operating Mode:	10/100/1000Base-T to Fiber
Ethernet Interface:	RJ-45 (CAT5)
Fiber Interface:	SC Connector Std.
Transmission Distance:	See table
System Wavelength:	850, 1310 nm or 1550 nm
Data Rate:	10/100/1000 Mbps
Error rate:	10^-12
Operating Temperature:	0° C to 70° C
Input Power:	5-60 VDC, 10W. External with power supply-S.I.Tech #2164-100/240VAC 50/60Hz to 12VDC UL, CSA, CE, & TUVGS Listed
Metal Enclosure:	5.75"L X 3.8'W X 1.0"H (14.60 X 9.60 X 2.54 cm)
Weight:	0.5 lb. (225 grams)

Operating Distance for Fiber Optic Cable

S.I. Tech Model 2160 Diagram