S.I. Tech Home » Signal Distribution Systems » Model 2350

Model 2350

Ethernet to Fiber Transceiver Card

S.I. Tech Model 2350 Ethernet to Fiber Transceiver Card

S.I. Tech Model 2350

Features:

Supports 10 Base - FL or FOIRL Standards
Small size
Link Status, Receive Data, Transmit Data, and Power LED indicators
ST or SMA optical connectors

S.I.Tech 2350 Ethernet Fiber Optic Transceiver is a Eurocard for connection of Ethernet based equipment to any fiber optic 10 Base FL/FOIRL network. The transceiver connects to RJ45 and provides ST or SMA fiber optic connectors. The 3000 rack holds up to sixteen 2350 cards, ideal for computer rooms, clustered areas.

Four LED indicators provide a visible verification of transmission status and transceiver functions.

Specifications

Operating Mode:	10 Base – FL/FOIRL
Input/Output Interface:	ST optical connector standard (SMA option).
Transmission Distance:	6600 ft (2 km)
Transmitter Output Power:	30µW, 62.5/125 micron fiber
System Wavelength:	850 nm (1300 nm option)
Data Rate:	10 Mbps
Bit Error rate:	10^-9
Receiver Sensitivity:	3µW
Operating Temperature:	0 °C to 50 °C
Enclosure:	19" rack
Card Size:	EuroCard 3.9" X 6.8" (9.9 x 17.3 cm)
Weight:	0.5 lb (200 grams)

Operating Distance for Fiber Optic Cable

S.I. Tech Model 2350 Diagram

Optical Unit Connection: Connect the optical transmission line to the T and R receptacles. Note which cable channel goes to T or R by noting cable imprint. On the other end, reverse the connection.

S.I. Tech Model 2350 Diagram