Bomara Home » Server Technology Products » Switched PDU Products » STV-6509J

 Server Technology STV-6509J: Switched 3 Phase PDU 230/400VAC Wye 16A IEC 60309 3P+N+PE 6Hr Input, (30) C13 & (6) C19 Output

STV-6509J (Master)
SEV-6509J (Expansion)





Inputs
Input Voltage: 400VAC 3 Phase
Input Plug: 230/400V Wye 16A IEC 60309 3P+N+PE 6Hr
Input Current: 16
Input Current Rated: 16
Outputs
Connector: (30) x IEC 60320/C13
North American Rating (C13): ≤ 10A @230V L-N
   
Connector: (6) x IEC 60320/C19
North American Rating (C19): ≤ 16A @230V L-N
 
Locking outlets provide high-retention even for non-locking cords.
Branch Circuit Protection
UL489 compliant 1-pole, 20A trip circuit breakers, six (6) branches, rating: ≤ 16A @220-240V
Physical
Dimensions: 70.0 (1778.0 mm) tall x 2.19 (56.0 mm) wide x 2.25 (58.0 mm) deep | 26 lbs (11 kg)
Environmental
Operating Environment: 32°F to 140°F / 0°C to 60 °C | 8%RH to 90%RH non-condensing | 6,500ft/2km elevation
Storage Environment: -40°F to 185°F / -40°C to 85°C | 8%RH to 90%RH non-condensing | 50,000ft/15km elevation
Quiescent / Unloaded Power Draw: <10W for all configurations
Communications & Security
10/100 Mbps Ethernet (RJ-45 connector), RS-232 serial (RJ-45 connector) Two (2) temperature/humidity sensor inputs (4P4C), Link port (RJ-12) - {also on Link PDU} Web-browser GUI and command-line interface (CLI): HTTP/HTTPS, TLSv1, SSHv2, Telnet, SNMPv2c and v3 (GET, SET, Traps), IPv4 and IPv6, LDAPv3/LDAPS, TACACS+, RADIUS, FTP/SFTP
Certifications
North American: TUV T-Mark to EN 60950-1:2006 + A11 + A1 + A12
EMC to EN 55022 Class A, EN 55024, CISPR 22 Class A
CE Mark
RoHS/WEEE
Measurement Accuracy
Input Measurement Accuracy: LED Current = ± 10% at 0.1 amp (0.3 - 9.9 amps) and 1 amp (> 9.9 amps) resolution
GUI Current = ± 1% at 0.01 amp resolution (above 0.25 amp)
Voltage = ± 1% at 0.1 volt resolution (nominal ± 10%)
Active Power = ± 1% at 1 watt resolution
Apparent Power = ± 1% at 1 volt-amp resolution
Power Factor = ± 3% at 0.01 resolution
Crest Factor = ± 10% at 0.1 resolution
Energy = ± 1% at 0.1 kilowatt-hour resolution
Output Measurement Accuracy: GUI Current = ± 1% at 0.01 amp resolution (above 0.15 amp)
Voltage = ± 1% at 0.1 volt resolution (nominal ± 10%)
Active Power = ± 1% at 1 watt resolution
Apparent Power = ± 1% at 1 volt-amp resolution
Power Factor = ± 3% at 0.01 resolution
Crest Factor = ± 10% at 0.1 resolution
Energy = ± 1% at 1 watt-hour resolution
Branch Measurement Accuracy: Current = ± 3% at 0.01 amp resolution (above 0.5 amp)
Optional Accessories
EMTH-1-1 Combination Temperature/Humidity Probe, 10ft (3m)
EMCU-1-1B Environmental Monitor adding:
   - Two (2) EMTH-1-1 temperature/humidity ports (one probe included)
   - One (1) EMWS-1-1 water sensor port (probe sold separately)
   - Four (4) dry contact (NO/NC) monitoring points
   - One (1) 8-bit analog-to-digital converter (0 to 5VDC)

KIT-PRO2LINK-01M or -01D provides ability to link (2) additional PRO2 units KIT-STEYE-01 or -10 provides access to key metrics through Bluetooth SPM (Sentry® Power Manager):
   - Monitor and manage multiple PDUs from a single point
   - Monitor and manage alarm conditions
   - Create reports and trends on stored data
   - Analyze power usage per phase
   - Optional appliance or virtual version
   - Vmware Ready2

Mounting Brackets:
   - Buttons (KIT-0020) included for tool-less mounting
   - Custom mounting options available. Contact Bomara Associates

Cable Retention Devices for non-locking cords:
   - Ezip
   - Cable Sleeve

 




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification:

View Full Site View Mobile Optimized