CPS » Dial Security » Challenger TT

CHALLENGER TT

Touch-Tone Security System for Dial Modem, Voice or FAX Authentication

Challenger TT Picture Use for:
  • Stationary or Mobile Applications
  • Securing Maintenance Ports
  • Providing One Time Access to Vendors
  • Defeating War Dialers
  • Eliminate Wrong Numbers that may Hang Your System
  • Eliminate Aggravating Unwanted Calls

APPLICATION DIAGRAM

Challenger TT Application Diagram


DESCRIPTION

  • Up to Eight Touch-Tone Access Digits
  • Change Access Codes Locally or Remotely
  • Enable/Disable Outbound Calls
  • No User Training Required
  • Transparent to the Hardware and Software

Introduction
The Challenger TT, is a touch-tone security device for dial telephone lines. It provides an economical method to provide a medium level security to authenticate voice, fax or modem calls.

Programmable
The caller's Touch-Tone access codes may be up to eight digits. Six of which can be changed easily by the security administrator, locally or remotely (dip-switch enabled). The access codes and programming codes can be entered from any standard telephone, cellular phone or modem, domestically or internationally.

Operation
When a call is received, the Challenger TT answers the line and waits for the proper Touch-Tone access codes. This also eliminates war dialers from discovering modems that may be attached. If the proper access code is not received within the user-defined time, the call is aborted.

Calls that include the proper access code re-ring the connected device, transparent to the caller.

 

Sample of Touch-Tone access entered after the "Beep":
"beep" # (up to six numbers) #

If this were transmitted from a modem:
ATDT 17709450643 @ # (up to six numbers) #

Remote Programming Touch-Tone commands are handled in much the same manner.

Outbound calls can be enabled or disabled as a part of the administrative setup.

Economical
Since the caller requires no additional hardware, the Challenger TT represents a more economical approach to dial-line security than other Challenger products.

Other higher security level Challenger systems rely on recognition hardware being present at both ends of the dial link instead of the Touch-Tones. See the Challenger P2 and the Standard Challenger.


SPECIFICATIONS

CHALLENGER TT
Item No SECTT-1     Price Contact Bomara 

Physical    4.5" W x 3" D x 1.25" H, 1 lb.
Connectors  (2) RJ-11 TelCo
LEDs        (3) Power, Mode
Switches    (1) 4-Bit Dip, (1) Pushbutton
Bell        None
Cable       (1) 5' RJ-11 Phone Cable
Adaptor     None
AC Power    Wall Mount 9VAC 1A, 115V/60Hz

NOTE: For 220/50Hz., add (-INT) to the Item No



Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification:

View Full Site View Mobile Optimized