East Coast Datacom » WAN Emulators

WAN Emulators for Ethernet, Serial Data, and TELCO

WanRaptor Network Emulator

The new WanRaptor™ Network Emulator is an easy to use, economical test solution to validate your applications in a lab environment by emulating bandwidth, latency, loss and jitter of wide area networks. With the purchase of the WanRaptor™ you receive a COTS hardware system with embedded software supporting network emulation on 10/100/1000, 10G, 25G and 40G optional interfaces.

BGP Network Emulator for 10G or 1G

BGP Network Emulator. The Border Gateway Protocol or BGP is at the core of the modern Internet. Large corporate and government enterprise networks are increasing their use of BGP to interconnect different administrative and country specific regions.

PDS-1G, MINI PORTABLE WAN EMULATOR

The PDS-1G is an mini low cost Portable Delay Simulator allowing users to test critical network equipment by altering bandwidth, latency, packet loss and congestion for network impairment testing over 10/100/1000 Ethernet.

10G Network Emulator and Packet Loss Testing

The EDS-10/40G is a Network Emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, network congestion and other important link impairments over 10/100/1000, 10GbE, 25GbE and 40GbE Ethernet. The product is an excellent test tool for network impairment testing.

EDS-1G, 1G WAN LATENCY EMULATOR, Satsim

The EDS-1G is an network emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000 copper or fiber Ethernet. A WAN Emulator or Satsim is excellent for network impairment testing.

RDS-PLUS, SERIAL DATA NETWORK EMULATOR

The RDS-PLUS is a modular, network link error and delay simulator that provides a realistic simulation of physical network behavior with respect to time delays and bit errors. The RDS-PLUS supports a wide range of interface types and speeds, ranging from 1200bps to over 50Mbps.

UDC-RDS_HS, HIGH SPEED NETWORK LATENCY EMULATOR

For testing network transmission delays. The UDC-RDS Network Delay Simulator allows connections at data rates of 8kbps up to 3.072Mbps while simulating network latency.

UDC-RDS_LS, LOW SPEED DATA LINK DELAY EMULATOR

Serial Data Link Delay Emulator. The UDC-RDS Network Delay Emulator allows connections at data rates of 300bps up to 1.024Mbps while simulating network latency.

V.35 BREAKOUT BOX

The V.35/X.21 Breakout Box provides access to all V.35 or X.21 conductors when inserted between a Modem and Terminal device.

DTS, RS-530 LOOPBACK TEST SET

The Data Test Set (DTS) provides a means for a technician at a remote site to implement a full external loopback at the terminal port of a DSU or modem and to obtain visual indication of the circuit operation.




Call Us: 1-978-452-2299
First Name:
Last Name:
Company:
Address:
Mail Stop:
City:
State (if in US):
Province/Region (if outside US):
Country:
ZIP (Postal) Code:
E-mail:
Telephone:
Fax:
Questions/Comments:
Verification: Please type:
Please have a Bomara Associates representative contact me


View Full Site View Mobile Optimized