Hirschmann Home » Managed Industrial Ethernet Switches » Ruggedized Switches » MACH1000 » MAR1130- CCTTTTTTMMMMMMMMMM99999999UM9HPHH08.0.

 MACH1000, Gigabit Ethernet switch 2-20 ports, ports on rear: MAR1130- CCTTTTTTMMMMMMMMMM99999999UM9HPHH08.0.

   Product description:

Description Industrial managed Fast/Gigabit Ethernet Switch, 19" rack mount, fanless design, according to IEEE 802.3, Store-and-Forward-Switching, ports on rear
Port type and quantity Gigabit-Ethernet ports in total: 2; 2 x Combo ports (10/100/1000BASE-TX RJ 45 plus FE/GE-SFP-slot; Fast-Ethernet ports in total: 16 x ports in total; 6 x Twisted Pair; 10 x Multimode SC;

   More Interfaces:

Power supply/signaling contact Power supply 1: power supply 3 pin plug-in terminal block signal contact 2 pin plug-in terminal block; Power supply 2: not assembled
V.24 interface 1 x RJ11 socket
USB interface 1 x to connect auto-configuration adapter ACA21-USB

   Network size - length of cable:

Twisted pair (TP) 0 m ... 100 m
Multimode fiber (MM) 50/125 µm 0 - 5000 m, 8 dB Link Budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 800 MHz x km and cf. SFP modules M-SFPxx
Multimode fiber (MM) 62.5/125 µm 0 - 4000 m, 11 dB Link Budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 500 MHz x km and cf. SFP modules M-SFPxx
Single mode fiber (SM) 9/125 µm cf. SFP modules M-SFPxx
Single mode fiber (LH) 9/125 µm (long haul transceiver) cf. SFP modules M-SFPxx

   Network size - cascadibility:

Line - / star topology Any
Ring structure (HIPER-Ring) quantity switches 100 switches

   Power requirements:

Operating voltage Power supply 1: 120/250 VDC, 110/230V VAC; Power supply 2: not assembled
Current consumption at 230 V AC Power supply 1 and 2: 150 mA (35W) max, if all ports are equipped with fiber


Management Serial interface, web-interface, SNMP V1/V2, HiVision file transfer SW HTTP/TFTP, LLDP-MED, Voice VLAN
Diagnostics LEDs, log-file, syslog, relay contact, RMON, port mirroring 1:1 and n:1, egress/ingress traffic configurable, topology discovery 802.1AB, cable tester (TX), address conflict detection, network error detection, SFP diagnostic [temperature, optical input and output power (µW and dBm)], Trap for configuration saving and changing, duplex mismatch detection, disable learning, Port Monitor
Configuration Command line interface (CLI), TELNET, BootP, DHCP, DHCP option 82, HIDiscovery, easy device exchange with auto-configuration adapter ACA21-USB (automatic software and/or configuration upload), automatic script load from ACA21, integrated DHCP server per port, DHCP relay, automatic invalid configuration undo, Offline Configuration, SFP Whitelist, ARC automatic ring configuration (MRP), automatic port shutdown (link flapping), configuration signature (water marking), overload detection
Security Port Security (IP und MAC) with multiple addresses (MAC 50 per port), SNMP V3, SSHv2, Authentication (IEEE802.1x), 802.1x Multi Client Authentication, Guest VLAN and Unauthenticated VLAN, Port based Radius VLAN assignment
Redundancy functions HIPER-Ring, Fast HIPER-Ring, MRP, MSTP, RSTP - IEEE802.1D-2004, MRP and RSTP in parallel, link aggregation, multiple rings
Filter QoS 4 classes, prioritization (IEEE 802.1D/p), VLAN (IEEE 802.1Q), Voice VLAN, shared VLAN learning, Q-in-Q double VLAN tagging, multicast IGMP v1/v2/v3 (snooping/querier), multicast detection unknown multicast, broadcast-, unicast-, multicast limiter, fast aging, GMRP IEEE 802.1D, Jumbo Frame Support
Industrial Profiles EtherNet/IP and PROFINET (2.2 PDEV, GSDML Stand-alone generator, automatic device exchange) profiles included, configuration and diagnostic via automation software tools like e.g. STEP7, or Control Logix IEC61850 protocol (MMS Server, Switch Model)
Time synchronization SNTP Server, PTP / IEEE 1588, realtime clock with energy buffer
Flow control Flow Control 802.3x, Port Priority 802.1D/p, Priority (TOS/DIFFSERV), Prio (MAC/IP), Prio Mapping (TOS Layer2), Traffic Shaping (Unicast, Multicast, Broadcast) Ingress / Egress

   Ambient conditions:

Operating temperature -40 ºC ... 85 ºC
Storage/transport temperature -40 ºC ... 85 ºC
Relative humidity (non-condensing) 10 % ... 95 %
Protective paint on PCB No

   Mechanical construction:

Dimensions (W x H x D) 445 mm x 44 mm x 308 mm
Mounting 19" control cabinet
Weight appr. 5 kg
Protection class IP30

   Mechanical stability:

IEC 60068-2-27 shock 15 g, 11 ms duration, 18 shocks
IEC 60068-2-6 vibration 1 mm, 2 Hz - 13.2 Hz, 90 min.; 0.7g, 13,2 Hz - 100 Hz, 90 min.; 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.

   EMC interference immunity:

EN 61000-4-2 electrostatic discharge (ESD) 8 kV contact discharge, 15 kV air discharge
EN 61000-4-3 electromagnetic field 35 V/m (80 - 2700 MHz); 1kHz, 80% AM
EN 61000-4-4 fast transients (burst) 4 kV power line, 4 kV data line
EN 61000-4-5 surge voltage Power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line IEEE1613: power line 5kV (line/earth)
EN 61000-4-6 conducted immunity 2,5 kV (line/earth), 1 kV (line/line) (1MHz)
EN 61000-4-16 mains frequency voltage 30V, 50Hz continuous; 300V, 50Hz 1s

   EMC emitted immunity:

FCC CFR47 Part 15 FCC CFR47 Part 15 Class A
EN 55022 EN 55022 Class A


Safety of industrial control equipment cUL 508 (pending)
Hazardous locations cUL 1604 Class1 Div 2 (pending)
Germanischer Lloyd Germanischer Lloyd (in preparation)
Substation IEC 61850-3; IEEE 1613
Transportation EN 50121-4, NEMA TS

   Scope of delivery and accessories:

Scope of delivery Device, operating manual

Call Us: 1-978-452-2299
First Name:
Last Name:
Mail Stop:
State (if in US):
Province/Region (if outside US):
ZIP (Postal) Code:

View Full Site View Mobile Optimized